If you are looking for the best Plextor SSD cloning software to migrate OS or entire disk, try AOMEI Backupper Professional. It will include everything and ensure secure boot after cloning.
Plextor SSD drive is a well-known hard drive for computers, which provides a better capability than HDD drives. Plextor SSD drive owns these features: carries easily, no noise when working, and has a faster speed of reading and writing.
The Plextor SSDs include Plextor M8VC Plus SATA SSDs, M8VG Plus M.2 SSDs, M9P(Y) Plus M.2 NVMe SSDs, M9P(G) Plus M.2 NVMe SSD, M9P(GN) Plus M.2 NVMe SSDs, etc.
And it comes with a Plextor SSD toolbox - Plextor NVMe, which shows drive status, model, capacity information, health, temperature monitoring, S.M.A.R.T. of Plextor SSD, and perform secure erase.
In fact, both HDDs and SSDs are used to store data, such as the operating system, installed programs, files, etc. You can easily transfer files from one hard drive to another with the traditional copy-and-paste method, even a new computer. But if you want to move installed programs or OS, it will not work. In this case, you need to use Plextor cloning software.
And usually, there are some common situations you will use it:
It’s wise to clone OS to Plextor SSD with the best Plextor SSD cloning software - AOMEI Backupper Professional, which helps you speed up the computer if your computer has a low response and long boot time.
Compared with reinstalling Windows, the process costs less time, and it will keep the operating system, installed programs, personal settings and data. So you don't need to waste time installing them again.
In this Plextor cloning software, you can also enjoy the following advantages:
Please download the Plextor migration software - AOMEI Backupper Professional to have a try. (The Clone features in the free trial can only be demonstrated, please upgrade to enjoy)
Please backup files first if your Plextor SSD drive has any important data. Because the data on Plextor SSD will be wiped out finally. And then follow the steps below to migrate OS to Plextor SSD in Windows 11/10/8/7.
Step 1. Launch the Plextor SSD cloning software - AOMEI Backupper. Select Clone > System Clone subsequently.
Step 2. The AOMEI Backupper program will select the partitions associated with system files automatically, and skip this step for you. Select the Plextor SSD as the destination to save Windows operating system, and hit Next.
Step 3. Tick the SSD Alignment option to accelerate the Plextor SSD. And press Start Clone to migrate OS to Plextor SSD easily and safely.
Tips: ✪ If the Plextor SSD is larger, you will see another cloning feature - Make full use of space. And it is checked by default to extend unallocated space to system partition automatically. ✪ Please don't tick the Sector by sector clone feature unless your Plextor SSD is an encrypted disk or your source disk has bad sectors. So in most cases, you just need to leave it alone.
After the process is finished, please change the boot order in BIOS to boot from the Plextor SSD, or replace HDD with Plextor SSD and boot from it directly, then that’s all.
Besides, this software also helps you perform M.2 SSD clone or NVMe SSD clone to boost the computer's performance. or just to deal with low disk error.
It’s just a piece of cake for the Plextor SSD cloning software - AOMEI Backupper to move OS to SSD without reinstalling, or clone HDD to Plextor SSD with everything transferred. And you could choose to clone data partitions and move your important data.
For Windows Server users, please try AOMEI Backupper Server. You can enjoy all the cloning features in the Professional version and other features like Real-Time Sync, Mirror Sync, etc to transfer files. If you want to create an exact copy of files with a compression image, try the Backup feature in this software.