3 Fixes: Acronis Clone Not Booting (Solutions And Alternative)
This article provides three detailed methods to help you solve Acronis clone not booting problems, and finally recommends a professional disk cloning software for secure booting.
Why Won’t My Cloned Drive Boot?
Hi, here! Acronis clone won’t bootable may due to the following reasons:
- Incorrect Boot Order: The boot order in BIOS/UEFI settings may not be configured correctly, with the cloned drive not set as the primary boot device.
- Corrupted MBR or GPT: The Master Boot Record (MBR) or GUID Partition Table (GPT) on the cloned drive might be corrupted.
- Inactive Partition: The cloned partition may not be set as the active partition.
- Missing or Corrupted Boot Files: Essential boot files may be missing or corrupted on the cloned drive.
It can also be due to some security software interference or incomplete cloning process and other factors. Identifying the specific cause can help in finding an appropriate solution to make the Acronis clone boot successfully.
If you can't pinpoint the cause, that's okay. This article will provide you with several effective ways to help you solve Acronis clone not booting problem, please try them one by one until your problem is solved.
How to Fix Acronis Clone Not Booting with 3 Ways
If you are experiencing issues with an Acronis clone not booting, there are several ways you can take to troubleshoot and resolve the problem. Here's a step-by-step guide:
1. Check Connection and Configuration
Ensure that the cloned drive is properly connected to your system. Verify that the boot order in the BIOS/UEFI settings is configured correctly, with the cloned drive set as the first boot device.
Step 1. Ensure your computer is powered on, and then restart it.
Step 2. During the startup process, you need to access the BIOS or UEFI settings. The key to enter these settings varies (common keys include F2, Del, Esc, F10, or F12). Check your system's manual or look for on-screen prompts during boot.
Step 3. In the BIOS/UEFI settings, select Boot, and after selecting the cloned drive, use the appropriate key (usually Page Up/Page Down or +/-) to move it to the top of the boot sequence. This action makes the cloned drive the first boot device.
Step 4. Save the changes you made to the boot order. Look for option Exit. Confirm the action when prompted.
After saving the changes, your computer will restart. It should now boot from the cloned drive.
2. Repair MBR or GPT
You can try to repair Master Boot Record (MBR) or GUID Partition Table (GPT) when you encounter Acronis disk clone not bootable by following steps.
Step 1. Use the Windows installation media or a recovery disk to access the Command Prompt. And run following commands.
(Replace "C:" with the drive letter where Windows is installed and "S:" with the letter assigned to the EFI system partition.)
3. Perform a Startup Repair
Step 1. Boot from the Windows installation media or recovery disk.
Step 2. Choose the Repair your computer option, and go to Troubleshoot> Advanced options> Startup Repair to solve Acronis True image clone not booting issue.
Recommend: Perform Disk Clone Without Booting Problems
Is there a solution to clone a disk without encountering booting issues? Absolutely! It is strongly advised to employ AOMEI Backupper Professional, the top-notch cloning software compatible with Windows 11/10/8.1/8/7/Vista/XP.
With its user-friendly interface, AOMEI Backupper Professional facilitates a seamless disk cloning process, ensuring a successful boot from the cloned disk.
To clone a disk without encountering boot issues, follow these steps:
Step 1. Ensure the disk is connected to your computer and is detected. Download AOMEI Backupper for free, and install and launch the application. Navigate to Clone> Disk Clone.
Easiest Windows clone software for personal use.
Step 2. Choose the old disk as the source disk.
Step 3. Proceed by choosing the new disk as the destination disk.
Step 4. Proceed to the final page. Check the SSD Alignment box to enhance disk performance, then click on Start Clone.
This article provides three detailed methods to help you solve Acronis clone not booting problems, and finally recommends a professional disk cloning software for secure booting - AOMEI Backupper.
Leveraging AOMEI Backupper, effortlessly clone your HDD to SSD, ensuring seamless booting from the cloned SSD. Additionally, optimize the reading and writing speed of the SSD and extend its lifespan. Feel free to download and explore these features firsthand.