Solved: 0xc000000e After Clone in Windows 10

You may receive an error code 0xc000000e after clone in Windows 10. This article will provide you with the easiest and most effective 3 countermeasures.


By Miya Updated on November 6, 2023

Share this: instagram reddit

User Case: How Do I Fix Error Code 0xc000000e in Windows 10?

“Hey folks, I cloned my Windows 10 installation onto a new drive, but now I'm getting this pesky "0xc000000e" error. It's driving me nuts! I'm using a Dell XPS 15 laptop, and everything was working fine before the clone. Any ideas why this is happening and how I can fix it? I'm not a tech whiz, so any step-by-step guidance would be super appreciated. Thanks in advance.” 

If you are also experiencing the error code 0xc000000e after clone in Windows 10, no need to worry. This article will discuss in detail what causes this error code and how to fix it. At the end of the article, we will provide you with a complete backup solution. Help you stay away from these troubles! Let's take a look at the reasons why this error code occurs!

0xc000000e After Clone in Windows 10

Why Does Error Code 0xc000000e Occur?

Let's dig into the cause of this error code 0xc000000e after clone in Windows 10 before we jump into the solution. When you try to boot your computer normally or use the recovery tool, you might come across the Windows 10 error code 0xc000000e after clone on your screen.

So, what triggers this boot error in Windows 10? Here are a few possibilities:

  • Invalid BCD: The BCD is a crucial startup configuration file that Windows relies on to boot up. It can become invalid due to disk write errors, power failures, virus infections in the boot sector, and other factors.
  • Incorrect BIOS configuration: If you recently deleted system files in the C drive or messed with your BIOS settings, it could make the new settings incompatible with your hard drive. Pay attention to the Legacy BIOS boot mode and UEFI boot mode settings. If you installed the OS using Legacy BIOS boot mode, you can only boot it in that mode.
  • Driver incompatibility: Sometimes, custom drivers installed on your computer can clash with the operating system or hardware, causing compatibility issues.

Now, let's move on to the next part: how to fix the Windows error code 0xc000000e. Keep reading for a detailed tutorial.

How to Fix 0xc000000e After Clone in Windows 10

If you're facing boot error problems in Windows 10, don't worry! Here are some solutions you can try out. Keep these in mind whenever you come across similar issues. Each of these methods has the potential to effectively resolve your problem. So, give them a shot and see which one works best for you!

Solution 1. Double-Check Physical Device Connections

When dealing with error code 0xc000000e in Windows 11, it's important to start by examining the physical device connections on your computer system. This is because Windows determines the boot priority based on connected devices. If an external device takes precedence over your system's hard disk, it can lead to booting issues. To tackle this, follow these steps:

Step 1. Prior to booting up your machine, disconnect any external storage devices like external hard drives, CDs, and USB drives.

Step 2. Power off your computer and ensure that your keyboard, mouse, and other peripherals are securely connected before powering it back on.

By checking and adjusting these physical connections, you might be able to resolve the 0xc000000e after clone in Windows 10 and get your system up and running smoothly.

Solution 2. Reset BIOS Configuration

If you've made changes to the SATA disk controller mode in your BIOS settings before encountering this problem, you can attempt to revert it back to the original configuration. Here's how:

Step 1. Restart your computer and access the BIOS menu by pressing the key prompted on the screen.

Tip: The key to access the BIOS may vary depending on your computer model. It could be Esc, Del, F2, F8, F10, or F12.

Step 2. Look for the setting option related to the hard drive controller mode within the BIOS. Keep an eye out for options containing terms like SATA, IDE, or AHCI.

Enable Ahci Mode

Solution 3. Fix Corrupted BCD Files

When you come across boot errors, it's often due to corrupted BCD files. To tackle this issue, you can try rebuilding the BCD using the following method:

Step 1. Insert the Windows installation disc into your computer and boot it up.

Step 2. From the Windows Installation Setup window, select the Repair your computer option. Choose the operating system partition from the provided options and click Next.

Repair Your Computer

Step 3. Navigate to Troubleshoot > Advanced Options > Command Prompt. Enter the following commands to fix the Master Boot Record (MBR) and boot sector:

  • bootrec /fixmbr
  • bootrec /fixboot
  • bootrec /scanos

Step 4. Next, enter the command bootrec /rebuildbcd to rebuild the BCD. Press Enter to execute the command to solve 0xc000000e after clone in Windows 10 error code.


Backup Your Windows 10 to Prevent Such Issues

When facing such issues, the aforementioned solutions can be helpful in resolving immediate emergencies. However, they might not always be effective. It's important to be aware that establishing a backup routine is a preventive measure against such problems, safeguarding you from system failures and data loss.

In that regard, I highly recommend using the best free backup software, AOMEI Backupper Standard. It enables you to back up your system, files, partitions, and more. It supports various Windows PC operating systems, including Windows 11/10/8.1/8/7/Vista/XP.

Note: If you're utilizing server computers, I recommend using AOMEI Backupper Server.

Now, let's walk through the process of creating a full backup of your PC in Windows 10:

Step 1. Download and install AOMEI Backupper Standard Edition. Launch the software once it's installed.

Download FreewareWin11/10/8.1/8/7/XP
Secure Download

Step 2. Click on Backup and select System Backup from the options. Once you have created a backup image, you'll have the convenience of restoring your PC to a previous date whenever needed.

System Backup

Step 3. Customize the Task Name to differentiate it from other backups. The software will automatically select the system and boot partitions as the source. Specify a destination path to save the system backup. Options include USB, external drive, network share, NAS, and more.

Select Destination

Step 4. Initiate the system backup in Windows 11/10/8/7 by clicking on Start Backup.

Start Backup

Options: Customize settings according to your needs. You can add comments to differentiate system backups, compress backup image files, split large files, enable email notifications, and more.
Schedule Backup: Continuously protect your system by scheduling regular backups at specified intervals, such as daily, weekly, monthly, or based on events or USB plug in.
Backup Scheme: Choose backup methods (full/incremental/differential) and set up rules to automatically delete older backups, ensuring sufficient space on your backup location. Note that "Differential Backup" and "Automatic Backup Cleanup" are available in advanced editions like AOMEI Backupper Professional.


To summarize, here are the three methods to fix 0xc000000e after clone in Windows 10. Choose the one that suits your situation. It's crucial to develop the habit of regularly backing up important files to easily restore them in case of system issues.

AOMEI Backupper, the best free backup software, can safeguard your important files and eliminate the risk of data loss. It allows you to create backups in advance for immediate use when needed. Additionally, it offers powerful features such as SSD cloning to clone SSD to SSD in Windows 11. Download and try it without hesitation.

Miya · Editor
Miya has an excellent insight and receives professional and systematic technical training since joining AOMEI. She has a comprehensive understanding of computer issues, aiming at helping users troubleshoot all kinds of problems. A lot of computer users around the world have found her articles very helpful!