Scenario: Seagate Dashboard not working
I just purchased a new Seagate 3T Desktop Backup, and when I run a diagnostic on it, I'm told it is running correctly. However, the Seagate Dashboard does not working. It says a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Anyone have any ideas as to what the problem may be? Any help or suggestions would be much appreciated!
How to fix Seagate Dashboard not working in Windows 10/8/7?
As you know, Seagate Dashboard is a free utility that pre-installed on Seagate hard drives, including Backup Plus and Central. It can be used to protect and back up the digital files on your computer and mobile devices.
However, when you try to backup with it, you may meet Seagate Dashboard not working in Windows 10/8/7 issue, which generally shows in 4 situations – Initial job pending, Dashboard freezes after starting your first backup, Service Seagate Dashboard/Mobile Backup Service failed to start and Seagate Dashboard backup not working. Next, this article will walk you through the 4 errors and fix them one by one.
Situations 1: Initial job pending
This error may occur if the task was not created in Task Scheduler. You can first try hitting the refresh button. If the backup job still doesn’t start, you can create a task in Task Scheduler.
1. To create a task in Task Scheduler, you should first verify that a nji file was created in the following location:
C:\Users\UserName\AppData\Roaming\Seagate\Seagate Dashboard 2.0\Files\. You will see a file with your user name nji (UserName.nji). If that was not created uninstall and reinstall the software.
2. Then create task once nji has been verified. Open Computer Manager, locate Task Scheduler, select Create Task.
The action selects ‘New’ put "C:\Program Files (x86)\Seagate\Seagate Dashboard
2.0\NBCore.exe" with quotes in Program Script. In Add Arguments, you will need to put
the location of the nji file
C:\Users\UserName\AppData\Roaming\Seagate\Seagate Dashboard 2.0\Files\UserName.nji.
Situation 2: Dashboard freezes after starting your first backup
Dashboard freezing after starting your first backup means Seagate Dashboard backup stuck on backup. You can follow the steps below to solve this issue.
1. Reboot the computer. Then open Dashboard and restart the backup.
2. Close the program from the system tray.
3. Right-click the Dashboard icon located on the bottom-right side of the screen. Click ‘Quit’
4. Reopen the Dashboard program and restart the backup.
Situation 3: Service Seagate Dashboard/Mobile Backup Service failed to start.
There are a couple of instances you might encounter Seagate Dashboard won’t open.
1. You are not the Administrator on the computer.
2. Antivirus might cause the conflict with the installation process.
Therefore, to solve this issue, you can do the following:
1. Verify that you are the Administrator or have Admin rights on the computer you are using.
2. Temporarily disabling your antivirus prior to installing the software may also help resolve the issue.
Situation 4: Seagate dashboard installer not working
Seagate dashboard installer not working is very likely cause Seagate Dashboard incompatible with Windows 10. If the current installer is not the latest, you may encounter the Seagate Dashboard installer not working issue. Therefore, to solve this issue, you should download the latest installer from Seagate Dashboard.
Easier way to fix Seagate Dashboard not working
Seagate Dashboard alternative
Besides the issue Seagate Dashboard not working sometimes, it has its own inherent limitations. You cannot configure what drives or folders are included in the backup with Seagate Dashboard. When you use Seagate Dashboard to delete old backups, it will delete all your backups and will not keep a single one for you.
What’s more, the Seagate Dashboard that comes with the drive will not access network drives confirmed by their support, which will bring much inconvenience when you try to backup important files to shared folders or other NAS drives. Therefore, to have a better backup experience, you can use Seagate Dashboard alternative – AOEMI Backupper.
AOMEI Backupper is professional Windows backup and restore software that comes with many powerful features. You can backup system, disk, partition, files as you want. And you can backup all brands disk that can be detected by Windows. It supports to backup to external hard drive, cloud drive, NAS, etc. With this software, you can automatically delete old backups and keep the latest one(s).
Detailed steps to backup disk with alternative to Seagate Dashboard
Step 1. Download AOMEI Backupper and launch this software. Click Backup and then select Disk Backup.
Step 2. Choose the disk that you want to backup.
Step 3. Select another location as destination disk.
Step 4. You can click schedule to automatically backup your disk. If you think your backup will take much space, you can click Scheme to automatically delete old backup.
Step 5. Click Start Backup if all the settings are done.
When you find Seagate Dashboard not working, you can follow the above-mentioned methods to solve this issue. Or you can simply use an alternative tool - AOMEI Backupper to solve this issue. Actually, besides the mentioned several errors, you may also meet Seagate Dashboard not detecting device or Seagate Dashboard continuous backup not working. If you use AOEMI Backupper, this will not be an issue anymore, because it can detect any devices that can be detected by Windows.
If you want to protect unlimited computers within your company, you can pick AOMEI Backupper Technician. With the inbuilt AOMEI Image Deploy tool, you are also allowed to deploy/restore system image file on server-side computer to multiple client-side computers over network.