HP Victus SSD Upgrade Guide: Boost Speed and Storage

Why Upgrade the SSD on Your HP Victus?

Your HP Victus is built for performance, but its true potential can be held back by a slow or limited storage drive. Upgrading the SSD is one of the most effective ways to boost your laptop’s speed, responsiveness, and overall user experience. To be more specific, there are several benefits of performing HP Victus SSD upgrade:

🎯Faster Boot and Load Times

🎯Improved Gaming Experience (especially for 3A games)

🎯Better Multitasking and Workflow

🎯Increased Storage Capacity

🎯Enhanced System Reliability

Prepare for HP Victus 15/16 SSD Upgrade

Before diving into the SSD upgrade process for your HP Victus 15 or 16, it's important to prepare properly.

1. Gather necessary tools

Here are what you’ll need for the upgrade:

• Replacement SSD – Choose the right form factor and interface (M.2 NVMe)
• Small Phillips screwdriver – Preferably magnetic for dealing with tiny screws
• Plastic pry tool or guitar pick – For opening the bottom cover safely
• Thermal pad (optional) – Helps with cooling high-performance NVMe SSDs
• USB-to-M.2 SSD enclosure or adapter – Connect the target M.2 SSD for data cloning

2. Backup important data

Before making any hardware changes, back up your important files to an external drive or cloud storage. If you’re replacing the existing drive, this step is critical to avoid data loss.

3. Download cloning software

To upgrade SSD on HP Victus laptop without reinstalling OS and apps, you need a reliable disk cloning software - AOMEI Backupper Professional.

AOMEI Backupper

Easy Hard Drive and SSD Cloning Software

• User-Friendly Interface – Easy for beginners with a straightforward cloning process.

• Flexible Cloning Options – Supports system clone, disk clone, and partition clone.

• SSD Optimization – Aligns partitions correctly for SSD performance (4K alignment).

• HP Victus Compatibility – Works well with HP systems (supports GPT/UEFI and MBR/legacy BIOS).

Free Download
Windows 11/10/8.1/8/7

100% Secure

Download AOMEI Backupper now to try it out!

Step-By-Step Guide: HP Victus Upgrade SSD

Learn how to perform HP Victus 15/16 SSD upgrade step by step here. With AOMEI Backupper, you can clone your existing system drive to your new SSD instead of starting from scratch.

Step 1: Clone the Existing Drive

1. Connect the new SSD to your HP Victus using a USB-to-M.2 NVMe enclosure or adapter.

2. Launch AOMEI Backupper. Go to Clone > Disk Clone.

3. Select your current system drive as the source disk.

4. Choose the new SSD as the destination disk.

5. If the new SSD is larger than the original SSD, click Edit Partitions to allocate the extra space. You can also convert the partition style as necessary.

6. Tick SSD Alignment to optimize performance and lifespan. Finally, click Start Clone to begin the process.

Step 2: Swap the SSDs and Boot

Once cloning is complete, shut down your HP Victus and replace the old M.2 SSD with the new M.2 SSD:

1. Use a Phillips screwdriver to remove all screws on the back panel.

2. Use a plastic pry tool to gently pop open the bottom case.

3. Locate the M.2 SSD slot and unscrew the existing SSD.

4. Insert the new SSD at a 30-degree angle and secure it with the screw.

5. Reassemble the laptop and tighten all screws.

6. Power on your laptop. If everything was cloned correctly, Windows should boot just like before—but much faster!

Note: If the new SSD doesn’t boot as expected, check this guide “cloned SSD won’t boot” to get it fixed.

FAQs about HP Victus SSD Upgrade

Conclusion

HP Victus SSD upgrade is one of the smartest ways to enhance your laptop’s performance. You can enjoy faster boot times, smoother gameplay, and more storage space after swapping the SSD. With reliable cloning software AOMEI Backupper, the upgrade process becomes much easier because you don’t need to reinstall everything from scratch. Why not try it now?