How to Recover Data Lost by Diskpart Clean Completely
Wondering solutions to recover data lost by diskpart clean? This guide shares feasible solutions to recover data after diskpart clean with you.
What is diskpart and diskpart clean?
Diskpart is a command-line disk partitioning utility that comes with Windows 2000 and later operating systems. Users can use diskpart to create, delete, extend disk partitions, assign and remove drive letters, as well as create and extend volumes. That’s how the diskpart command interpreter manages your computer’s drives.
Let’s dig into the definition of diskpart clean. According to Microsoft, diskpart clean needs to remove all partitions or volume formatting from the disk with focus. After cleaning, the disk will be “Uninitialized”.
Thus, if you clean or delete your partition using diskpart, you could use a reliable solution to recover data lost by diskpart clean. Please read on.
How to recover data after diskpart clean?
How to recover data lost by diskpart clean? There are three feasible solutions. However, they are distinct because they point to the command prompt, data recovery, and partition recovery. Please consider these tips to increase the chances of recovery.
▶Stop using your hard drive and do not make any changes to it.
▶Do not reformat the hard drive.
▶Do not rebuild the partition table.
Way 1. Recover deleted partitions using CMD
CMD (command prompt/cmd.exe) is a powerful tool that can execute varied orders. You can recover files from hard drive using CMD. As stated earlier, the diskpart clean command could lead to partition loss. Similarly, you can also use diskpart to assign a drive letter. This performance can undo diskpart clean using CMD. You can refer to the following steps.
Step 1. Press the “Windows + R” keys to open the Run window. Then enter “diskmgmt. msc” and click “OK” to open Disk Management.
Step 2. Locate your deleted/lost partition and remember its size. Then the deleted partition space will be marked as unallocated space.
Step 3. Enter “cmd” in the search bar and select “Run as Administrator”.
Step 4. Type “diskpart” in the window and press “Enter”.
Step 5. Type “list disk” and press “Enter”. Then you can see all the partitions on the computer.
Step 6. Type “ and press “Enter” (# means the number of the hard drive including the lost partition).
Step 7. Type and press “Enter”.
Step 8. Type “ and press “Enter” (# means the number of the lost partition). Type “assign letter #” and press “Enter” (# means a drive letter that can be used).
Step 9. Exit this window and check whether your deleted partition is recovered or not.
Way 2. Recover data after diskpart clean with MyRecover
As the name suggests, this solution closely links to data recovery. In summary, MyRecover is user-friendly and powerful with exciting features.
This utility can work with all Windows operating systems due to its high compatibility. So it makes it easier for everyone to recover data lost by diskpart clean in Windows 11/10/8/7.
- Provide 2 advanced scanning methods Quick Scan and Deep Scan.
- You can recover Word, PPT, Excel, Photos, Videos, Audios, Emails, Web pages, Compressed files from HDD/SDD whether it’s due to deletion, formation, or system crash.
- You can filter, search, and preview deleted files during the recovery process.
- Provide a clear graphical user interface and simple operating steps.
Those users who are eager to recover formatted data might be in a panic. Here, you can also download and try out this fascinating application. Please refer to the following steps.
Step 1. Download and install MyRecover on your computer.
Step 2. After loading the disk, select the partition before deletion/cleaning, and click “Start Scan”.
Step 3. You will see your deleted files and other lost files after performing Quick Scan/Deep Scan automatically.
At this step,you could filter/search/target/preview the scanned files.
Step 4. Select your needed data, and click “Recover x files”. And choose a new location to save your recovered data.
Thus, you can easily achieve data recovery for free with the help of MyRecover. To enjoy unlimited data recovery, don't forget to check the advanced versions.
Remember to choose a new location to save your recovered files to avoid data overwriting.
Way 3. Recover partitions after diskpart clean in Windows 11/10/8/7
Compared with data recovery, some users might think partition recovery is a better way to recover data after diskpart clean. Nevertheless, the primary goal of partition recovery is to recover the deleted partition rather than the data.
Thus, if you want to use professional partition recovery software, you’d better ensure you haven’t performed any write data operations after executing the clean command. Here comes a highly recognized program, AOMEI Partition Assistant Professional.
This stable and fully-featured disk manager enables you to recover the deleted FAT, NTFS, Ext2, Ext3, and Ext4 partitions in Windows 11/10/8/7. You can start with its demo version to try an easy-to-use interface. Let’s show how it works.
Professional Scanning Methods of AOMEI Partition Assistant Professional
- Fast Search: Scan the first sector of each partition on the selected disk in order to find out the deleted or lost partition quickly. (Recommended)
- Full Search: Scan more in-depth search each sector of each partition on the selected disk. Consequently, it needs more time. You could choose this method when the Fast Search fails.
Step 1. Download and install it on your computer. Click “Partition Recovery Wizard” on the left panel, and select the disk that includes your clean/deleted partition, then click “Next”.
Step 2. Select “Fast Search” to find your clean/deleted partition quickly. And click the “Next” button.
Step 3. You can see your clean/deleted partition on the hard disk after scanning. Then you can select the partition you want to restore and click “Proceed”.
Step 4. After the recovery process finishes, you can click “Finish” to exit this window after seeing the “Congratulations” message.
How to protect data from diskpart clean
When protecting your data against the potential risks posed by DiskPart's clean and format commands, you'll want to consider these protective measures.
Furthermore, it's essential to acquaint yourself with valuable strategies for shielding your data against inadvertent removal through diskpart commands or similar operations. Here are the key steps to follow:
- Restoring Usability: If you find yourself in the unfortunate situation of accidentally executing the diskpart clean command, you can resurrect your storage device's functionality by establishing a new partition.
- Regular Data Backups: One of the most effective precautions you can take is the routine backup of essential data.
By diligently following these steps, you can reduce the risk of data loss and ensure that your storage devices remain both secure and accessible.
In this tutorial, you’ve learned the meaning of diskpart and diskpart clean. And you can adopt some practical tips to improve the rate of data recovery or partition recovery.
How to recover data lost by diskpart clean? All in all, you can undo diskpart clean using CMD for partition recovery. But the command prompt is difficult for inexperienced users. So you’re suggested to select other convenient tools such as MyRecover or AOMEI Partition Assistant to recover data after diskpart clean.