By Cherry / Last Updated November 14, 2016

About SSHD

SSHD, the abbreviation of Solid State Hybrid Drive, is a logical or physical storage device that combines a fast storage medium like NAND flash memory with a hard disk drive, with the intent of adding some of the speed of flash storage to the cost-effective capacity of traditional HDDs, resulting in a single, integrated device. The purpose of the SSD in a hybrid drive is to act as a cache for the data stored on the HDD, improving the overall performance by keeping copies of the most frequently used data on the faster SSD. Thus, SSHD has a better performance than SSD. So, many users want to upgrade laptop SSHD without reinstalling system to get a better performance.


Laptop SSHD upgrade without reinstalling system

If you want to upgrade laptop SSHD without reinstalling system, here we highly recommend you a software AOMEI Backupper.

AOMEI Backupper is a powerful disk cloning software that is benefit for your laptop SSHD upgrade without reinstalling system. You can use it to upgrade your laptop hard drive to SSHD easily through the Clone feature, and boot your laptop from the SSHD directly. You can follow the detailed steps below:

Step1. Connect the SSHD to your laptop and make sure it can be detected. Then, install and launch AOMEI Backupper. To upgrade laptop SSHD without reinstalling, here you need to clone your old hard drive to the SSHD first. Click Clone, then, select Disk Clone.

Disk Clone

Step2. Select the original hard drive as the source disk in Step1.

Source Disk

Step3. Then, click theStep2 to select the SSHD as the destination disk.

Destination Disk

Step4.You will move to the final page where you can confirm all operations, if there is no problem, clickStart Clone to submit the task.

Start Clone


● You can edit the partition on the destination disk by Edit partitions on the destination disk, so that your SSHD drive would be in the best status after cloning.

● You can clone every byte on the hard drive by checking the checkbox in front of Sector by sector clone, but this could take more time and occupy more space.

● TheAlign partition to optimize for SSD is for users who use SSD as the destination disk. It can optimize its performance after cloning.

After cloning, you can boot your computer from the SSHD. Put the special key to enter the BIOS mode and change the boot order to boot from the SSHD.

Laptop SSHD upgrade without reinstalling system by using AOMEI Backupper is a very simple thing. You can also migrate OS to another hard drive directly. Actually, you can use it to do many other thing for keeping your data safe, like create system image backup so that you can restore computer to an earlier date once you need. Besides, it has many powerful functions.